1d Õide Nanostructures Obtained By Sol-gel And Hydrothermal Methods

Thảo luận trong 'Học tập' bởi Bkdlib, 4/5/2024.

  1. Bkdlib

    Bkdlib Bắt đầu nổi tiếng

    Tham gia:
    4/5/2024
    Bài viết:
    3,711
    Đã được thích:
    0
    Điểm thành tích:
    86
    [​IMG]
    1D Oxide Nanostructures Obtained by Sol-Gel and Hydrothermal Methods
    By: Crina Anastasescu; Susana Mihaiu; Silviu Preda; Maria Zaharescu
    Publisher:
    Springer
    Print ISBN: 9783319329864, 3319329863
    eText ISBN: 9783319329888, 331932988X
    Copyright year: 2016
    Format: PDF
    Available from $ 69.99 USD
    SKU 9783319329888
    This book presents wet chemical sol-gel and hydrothermal methods for 1D oxide nanostructure preparation. These methods represent an attractive route to multifunctional nanomaterials synthesis, as they are versatile, inexpensive and, thus, appropriate for obtaining a wide range of oxide materials with tailored morphology and properties. Three specific oxides (SiO2, TiO2, ZnO) are discussed in detail in order to illustrate the principle of the sol-gel and hydrothermal preparation of 1D oxide nanostructures. Other oxides synthesized via this method are also briefly presented. Throughout the book, the correlation between the tubular structure and the physico-chemical properties of these materials is highlighted. 1D oxide nanostructures exhibit interesting optical and electrical properties, due to their confined morphology. In addition, a well-defined geometry can be associated with chemically active species. For example, the pure SiO2 nanotubes presented a slight photocatalytic activity, while the Pt-doped SiO2 tubular materials act as microreactors in catalytic reactions. In the case of titania and titanate nanotubes, large specific surface area and pore volume, ion-exchange ability, enhanced light absorption, and fast electron-transport capability have attracted significant research interest. The chemical and physical modifications (microwave assisted hydrothermal methods) discussed here improve the formation kinetics of the nanotubes. The ZnO nanorods/tubes were prepared as random particles or as large areas of small, oriented 1D ZnO nanostructures on a variety of substrates. In the latter case a sol-gel layer is deposited on the substrate prior to the hydrothermal preparation. Using appropriate dopants, coatings of ZnO nanorods with controlled electrical behavior can be obtained.
    Download now: https://ouo.io/LO2p0s
     

    Xem thêm các chủ đề tạo bởi Bkdlib
    Đang tải...


Chia sẻ trang này