Flow And Heat And Mass Transfer In Laminar And Turbulent Mist Gas-droplets Stream Over A Flat Plate

Thảo luận trong 'Học tập' bởi ebooksfree, 23/5/2024.

  1. ebooksfree

    ebooksfree Thành viên nổi tiếng

    Tham gia:
    20/5/2024
    Bài viết:
    5,995
    Đã được thích:
    0
    Điểm thành tích:
    86
    Click Here to Download: https://ouo.io/RY6u6LY
    [​IMG]
    Flow and Heat and Mass Transfer in Laminar and Turbulent Mist Gas-Droplets Stream over a Flat Plate
    By: Victor I. Terekhov; Maksim A. Pakhomov
    Publisher:
    Springer
    Print ISBN: 9783319044521, 3319044524
    eText ISBN: 9783319044538, 3319044532
    Copyright year: 2014
    Format: EPUB
    Available from $ 74.99 USD
    SKU 9783319044538
    In this book the author presents selected challenges of thermal-hydraulics modeling of two-phase flows in minichannels with change of phase. These encompass the common modeling of flow boiling and flow condensation using the same expression. Approaches to model these two respective cases show, however, that experimental data show different results to those obtained by methods of calculation of heat transfer coefficient for respective cases. Partially that can be devoted to the fact that there are non-adiabatic effects present in both types of phase change phenomena which modify the pressure drop due to friction, responsible for appropriate modelling. The modification of interface shear stresses between flow boiling and flow condensation in case of annular flow structure may be considered through incorporation of the so called blowing parameter, which differentiates between these two modes of heat transfer. On the other hand, in case of bubbly flows, the generation of bubbles also modifies the friction pressure drop by the influence of heat flux. Presented are also the results of a peculiar M-shape distribution of heat transfer coefficient specific to flow boiling in minichannels. Finally, some attention is devoted to mathematical modeling of dryout phenomena. A five equation model enabling determination of the dryout location is presented, where the mass balance equations for liquid film, droplets and gas are supplemented by momentum equations for liquid film and two-phase core.
     

    Xem thêm các chủ đề tạo bởi ebooksfree
    Đang tải...


Chia sẻ trang này