Buy Place to buy Tripadvisor Reviews https://verified-reviewers.com/product/best-place-to-buy-tripadvisor-reviews-100-safe/ https://verified-reviewers.com ## pathpilot mẹo nhanh, ## dro, ## gõ, ## phay, ## cnc ** pathpilot Mẹo nhanh: gõ vào dro ** DRO (đọc kỹ thuật số) trên máy CNC của bạn là một công cụ có giá trị để theo dõi vị trí và kích thước của phôi của bạn.Tuy nhiên, có thể khó gõ các giá trị trực tiếp vào DRO, đặc biệt nếu bạn không quen với bố cục bàn phím. Mẹo nhanh này sẽ chỉ cho bạn cách nhập các giá trị vào DRO trên máy CNC do PathPilot điều khiển. ** 1.Nhấn phím ** [ENTER] ** để mở chế độ đầu vào DRO. ** Chế độ đầu vào DRO là chế độ đặc biệt cho phép bạn nhập các giá trị trực tiếp vào DRO.Để vào chế độ này, chỉ cần nhấn phím ** [ENTER] ** trên bàn phím của bạn. ** 2.Sử dụng ** [Khóa mũi tên] ** để di chuyển con trỏ đến vị trí mong muốn. ** Khi bạn đang ở chế độ đầu vào DRO, bạn có thể sử dụng ** [Khóa mũi tên] ** để di chuyển con trỏ đến vị trí mong muốn.Con trỏ sẽ chớp mắt để cho biết bạn đang gõ ở đâu. ** 3.Nhập giá trị mong muốn. ** Khi bạn đã di chuyển con trỏ đến vị trí mong muốn, bạn có thể nhập giá trị mong muốn.Bạn có thể sử dụng số, chữ cái và ký hiệu. **4.Nhấn phím ** [ENTER] ** để xác nhận mục nhập của bạn. ** Khi bạn đã nhập xong trong giá trị của mình, hãy nhấn phím ** [ENTER] ** để xác nhận mục nhập của bạn.DRO sẽ hiển thị giá trị mới. ** 5.Nhấn phím ** [ESC] ** để thoát chế độ đầu vào DRO. ** Để thoát chế độ đầu vào DRO, chỉ cần nhấn phím ** [ESC] ** trên bàn phím của bạn. ** Dưới đây là một vài mẹo bổ sung để gõ các giá trị cho dro: ** *Bạn có thể sử dụng các phím ** [ctrl] ** và ** [Shift] ** để nhập các ký tự đặc biệt, chẳng hạn như dấu ngoặc đơn, dấu ngoặc và độ. *Bạn có thể sử dụng phím ** [Backspace] ** để xóa các ký tự. *Bạn có thể sử dụng phím ** [tab] ** để di chuyển con trỏ sang trường tiếp theo. *Bạn có thể sử dụng phím ** [ENTER] ** để di chuyển con trỏ sang dòng tiếp theo. ** Tôi hy vọng mẹo nhanh này giúp bạn thoải mái hơn khi gõ các giá trị cho DRO trên máy CNC do Pathpilot điều khiển. ** ** Dưới đây là 5 hashtag mà bạn có thể sử dụng cho bài viết này: ** * #PathPilot * #DRO * #Đánh máy * #Phay * #Cnc ======================================= ##PathPilot Quick Tips, ##DRO, ##Typing, ##Milling, ##CNC **PathPilot Quick Tips: Typing in the DRO** The DRO (Digital Readout) on your CNC machine is a valuable tool for keeping track of your workpiece's position and dimensions. However, it can be difficult to type in values directly to the DRO, especially if you're not familiar with the keyboard layout. This quick tip will show you how to type in values to the DRO on your PathPilot-controlled CNC machine. **1. Press the **[Enter]** key to open the DRO input mode.** The DRO input mode is a special mode that allows you to type in values directly to the DRO. To enter this mode, simply press the **[Enter]** key on your keyboard. **2. Use the **[ arrow keys ]** to move the cursor to the desired location.** Once you're in DRO input mode, you can use the **[ arrow keys ]** to move the cursor to the desired location. The cursor will blink to indicate where you're typing. **3. Type in the desired value.** Once you've moved the cursor to the desired location, you can type in the desired value. You can use numbers, letters, and symbols. **4. Press the **[Enter]** key to confirm your entry.** Once you've finished typing in your value, press the **[Enter]** key to confirm your entry. The DRO will display the new value. **5. Press the **[Esc]** key to exit DRO input mode.** To exit DRO input mode, simply press the **[Esc]** key on your keyboard. **Here are a few additional tips for typing in values to the DRO* * You can use the **[Ctrl]** and **[Shift]** keys to type in special characters, such as parentheses, brackets, and degrees. * You can use the **[Backspace]** key to delete characters. * You can use the **[Tab]** key to move the cursor to the next field. * You can use the **[Enter]** key to move the cursor to the next line. **I hope this quick tip helps you get more comfortable typing in values to the DRO on your PathPilot-controlled CNC machine.** **Here are 5 hashtags that you can use for this article* * #PathPilot * #DRO * #Typing * #Milling * #CNC View details Soure content: https://verified-reviewers.com/forum/threads/pathpilot-quick-tips-typing-in-the-dro.4154/